Console Wiring - Show Me Your Layouts

At some point this year, I’m redoing at least my console. I’ve got a dual console and underneath is a wreck. Well, anything that was there when I got it is a wreck. It seems like there is a wiring harness that disappears off into the boat somewhere and the comes back a different color before it lands on the terminal strip.

My setup includes the following inside of a steering console on a Sea Hunt Escape:

2 HDS 7’s Gen 1, w/Structure Scan (Gen 1 includes a box with enet cables)
Garmin VHF 100 (NMEA 183 to the primary HDS)
Garmin TR-1 Autopilot (includes a wired remote, compass ball, NMEA 183 to the primary and secondary HDS and the shadow drive flow sensor)
NMEA 2000/Yamaha Command link from the motor and gas tank to primary HDS (I have 2 guages, but think I’m skipping them as I redid my dash)
Standard lights, live well, 12V outlet, wash down, courtesy light, etc

and of course my hydraulic hoses for AP are in there too.

Show me your console’s wiring and brag about the details of how you did it please.

If you have schematics, post them up. I’m working on mine so when it is time to go, I won’t have to think much more.

BG